C-Arms //
C-Arms | Angiomax 100 – Interventional Angiofraphy Sysytem
Angiomax 100 – is revolutionary imaging system that offers exceptional technology for your facility’s digital imaging needs. The system covers a broad range of examinations, and excellent contrast resolution ensures accuracy.
Angiomax 100 is easy-to-use and positioning a patient only requires the push of a button.
SPECIFICATIONS
Measurements
Minimum room size required: 25 m squared
Procedure Tools
Stent view(Cardiac)
LA view- segmentation with mapping system interface (Cardiac)
Integrated 3D (Cardiac, General Vascular, Peripheral)
DOSE Control
Patient Table
Floor-mounted patient table for all angiographic examinations and interventions
Table height 75 cm to 110 cm
Table rotation ± 120° with 5° increments
Manual longitudinal travel 125 cm (49.2“)
Manual transverse travel ± 17.5 cm (6.9“)
Maximum table load 450 kg
Tabletop
Length: 290 cm
width: 48.0 cm
Flat detector
29 x 29 Amorphous silicon flat detector
High-resolution 1k matrix with 185 mcm pixel size and 14-bit digitization depth.)
Resolution: 1560 x 1560 pixels
X-ray generator
Microprocessor-controlled high-frequency X-ray generator with automatic dose rate control for fluoroscopy and acquisition
Multi-pulse converter frequency 100 kHz Max.
generator power 1000 mA at 100 kV
Tube current 0.5 to 1000 mA
Acquisition 40 to 125 kV in 0.1 kV steps
X-ray tube
New high-performance X-ray tube
Up to 40 % greater fluoro power with new flat emitter technology
Max. exposure voltage - 125 kV
21”Display
One or two displays enable a new dimension in medical imaging in the control room. Up to nine different image sources can be shown on the same display, allowing high flexibility in arranging images in 4 different screen layouts.
30”Display
Ceiling-mounted suspension system for 2 to 8 displays (not including data display) enables height adjustment, longitudinal travel, swivel capabilities.